TTE® Reining arena
The reining arena without a substructure - the highest riding comfort as a self-build
TTE®-MultiDrainPLUS 4000
closed base
with ca. 30 l/m2 empty chamber
WHY is the TTE® construction principle the right solution? (Comparison with a light grid)
- TTE® is significantly more stable than other riding arena plates and light grids
- the system replaces the base course layer (no excavation & compaction)
- an impact dampening/easy on the joints construction principle => construction hard onto soft (natural soil)
- strongly reduced build-up of dust due to the effective water storage of 8 litres/m2 (when filling with sand)
- removal of excess water by the spaces between the joints
- residue-free removal and a high resale value (about 50% after 5 years) simple and quick implementation - possible as a self-build
- the highest riding comfort for dressage, jumping and Western arenas
Elastic layer made out of wood chip
- the interlocking and load distribution of the TTE® elements allow overbuilding of an elastic layer
- the increased impact dampening leads to increased wear-reduction on the joints and system
- the elastic layer also insulates from the cold
A construction cross-section of a TTE® riding hall
Our recommendation:
An elastic layer for increased gentle treatment of the joints
A roughly 10 cm layer of wood chip can be used as an elastic layer (bedding) according to the use. This allows a particularly strong spring effect for pleasant, easy on the joints and low wear riding. The elastic layer also insulates from the cold.
TTE® Reining arena
The reining arena without a substructure - the highest riding comfort as a self-build
TTE®-MultiDrainPLUS 4000
closed base
with ca. 30 l/m2 empty chamber
WHY is the TTE® construction principle the right solution? (Comparison with a light grid)
- TTE® is significantly more stable than other riding arena plates and light grids
- the system replaces the base course layer (no excavation & compaction)
- an impact dampening/easy on the joints construction principle => construction hard onto soft (natural soil)
- strongly reduced build-up of dust due to the effective water storage of 8 litres/m2 (when filling with sand)
- removal of excess water by the spaces between the joints
- residue-free removal and a high resale value (about 50% after 5 years) simple and quick implementation - possible as a self-build
- the highest riding comfort for dressage, jumping and Western arenas
Elastic layer made out of wood chip
- the interlocking and load distribution of the TTE® elements allow overbuilding of an elastic layer
- the increased impact dampening leads to increased wear-reduction on the joints and system
- the elastic layer also insulates from the cold
A construction cross-section of a TTE® riding hall
Our recommendation:
An elastic layer for increased gentle treatment of the joints
A roughly 10 cm layer of wood chip can be used as an elastic layer (bedding) according to the use. This allows a particularly strong spring effect for pleasant, easy on the joints and low wear riding. The elastic layer also insulates from the cold.
